ZC9CBFX51 MITSUBISHI motor FX PLC series CPU connection cable (5 m)

Touch screen anti ultraviolet protective film (1 pieces).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).10.4 inches (TFT), replace the backlight (2 / set)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters ZC9CBFX51. Connector for connecting a serial port (1)1-0 DVI standard (DVI-D 24 pin convex connector)Backup battery for time and data backup (1) ZC9CBFX51Used to install the man-machine interface to the fixed panel. (4 / set)Portable GP2000H series models accessories, RS-232 single head cable (10 m).2 / setsThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port ZC9CBFX51. For 5.7 inch models, for fixing the hooks of the three EX modules.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.A veneer, for the GP4000 series back loading models of full flush (white, 1)Digital small keyboard with USB interface.The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication ZC9CBFX51. Engineering documents created by the LT interface to download images and logic programming software through the USB interface.7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).A veneer, for the GP4000 series back loading models of full flush (white, 1)Touch panel operation for RGB input modules (Master - from: Mini-B)Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationFor 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.7 inch widescreen display module installed on the senior paanel adapter GP-2400, GP-3400 and GP-4400 series of holes ZC9CBFX51. Suitable for LT4000M/GP4000M series modules, 5.7 inch. Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).Stop pin, prevent cable connecction loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) ZC9CBFX51.