ZC9CBA51 MITSUBISHI motor A PLC series connection cable (5 m)

For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Durable cable for connecting GP3000H adapter and GP3000H.10.4 inches (STN), the replacement of the host backlight (2 / set).Adapter for EX module (5 / set)Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable ZC9CBA51. (5 / set)Portable GP2000H series models accessories, RS-232 single head cable (10 m) ZC9CBA51Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationGLC2300 is not availableCable for connecting GP3000 to various modules1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card ZC9CBA51. For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface ZC9CBA51. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.COM1 interface with the cable for direct connection to the CPU series PLC ATo prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / sset)The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication ZC9CBA51. 1-0 DVI standard (DVI-D 24 pin convex connector)The man-machine interface directly connected MITSUBBISHI electric PLC FX series CPU programming port ZC9CBA51. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor output