PFXZGMAK1 Accessory Package

128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.COM2 terminal adapter for communication through the RS-422/485 connectionTouch screen anti ultraviolet protective film (1 pieces) PFXZGMAK1. LT seal on the control panel PFXZGMAK1Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Colorful LED switch with USB interface.7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.The MITSUBISHI Q series PLC is connected to GP, length: 5 m.5.7 inch screen protective cover (1 pieces)Use external output for the GP3000 series of auxiliary connectors (5 / sets) PFXZGMAK1. 7.4 inches, replace the backlight (1 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters PFXZGMAK1. For the operation screen (5 pieces) (GP3000H standard).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface10.4 inches and above, used to connect the power cord (5 / set).Adapter for EX module (5 / set)COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.Disposable film (5 sheets / sets) for protecting screen against contamination of human commputer interface PFXZGMAK1. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Used to install the human machine interface to the fixed panel (2 / cover) PFXZGMAK1. GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panel