PFXZGMSW1 Socket wrench

The MITSUBISHI Q series PLC is connected to GP, length: 5 m.The main controller is connected to the man-machine interface for MPI communication10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.Used to prevent accidental operation. Includes 3 mounting screws PFXZGMSW1. GP3000H portable slingSlave station module for connecting support for CANopenCOM1 interface with the cable for direct connection to the CPU series PLC QLT fasteners installed on the control panel (4 / set)7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes PFXZGMSW17.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connection13 pin input connectors for HTB and 16 pin output connectors PFXZGMSW1. (1 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorThe main controller is connected to the man-machine interface for MPI communicationThe host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication PFXZGMSW1. For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Cable for connecting GP3000 to various modulesTo prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)The MITSUBISHI A series PLC is connected to GP, length: 5 m.Interface module for the simultaneous use of A/QnA/FX seriess external controller10 PFXZGMSW1. 4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.Used to connect to an external device (Type-A RS-422//RS-485 interface) to an external device (USB interface) PFXZGMSW1. One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.