PS400-DF00 Screen protection film

LT4000M (module type DIO), PNP output, DC24V (host).Digital small keyboard with USB interface.Durable cable for connecting GP3000H adapter and GP3000H.Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).Touch screen anti ultraviolet protective film (1 pieces) PS400-DF00. The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display PS400-DF00 Use external output for the GP3000 series of auxiliary connectors (5 / sets).5.7 inch screen protective cover (1 pieces)Used to display analog RGB (2 channels) on the GP3000Touch screen anti ultraviolet protective film (1 pieces).Converting 2 analog signals into digital signalsFor the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters PS400-DF00. Memory for extending EX GP-Pro alarm and character table functions.12.1 inches, replace the backlight (1 / set)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)LT seal on the control panel PS400-DF00. LT fasteners installed on the control panel (4 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Connector for connecting DC power cord. (linear, 5 / set)15 inches, replaced by a host of backlight (1).10.4 inches and above, used to connect the power cord (5 / set).10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).A veneer, for the GP4000 series back loading models of full flush (white, 1)For thee man-machine interface hanging in the neck lanyard PS400-DF00. Cable for connecting GP3000 to various modulesUsed to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. Used to prevent disconnnection of the connection (1 interface, 5 / set) PS400-DF00. COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interface