GP077-SDAD10 Audio adapter

Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).SD memory card (4GB, MLC, CLASS4).For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.3 / setsFor thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port GP077-SDAD10 GP077-SDAD10 Adapter for EX module (5 / set)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) GP077-SDAD10. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) GP077-SDAD10. For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave joint5.7 inch screen protective cover (1 pieces)7.0/7.5 inch screen protective cover (1 pieces)COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)12 way 4 digital signals into analog signals and output results10.4 inches (STN), the replacement of the host backlight (2 / set).7.5 inches, GP installed to the hard panell to provide dust and moisture proof function GP077-SDAD10. LT4000M (module type DIO), PNP output, DC24V (host).Used to install the human machine interface to the fixed panel (2 / cover).Touch screen anti ultraviolet protective film (1 pieces).Colorfful LED switch with USB interface GP077-SDAD10. Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters.