5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).
OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.1-0 DVI standard (DVI-D 24 pin convex connector)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)For the operation screen (5 pieces) (GP3000H standard).Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket CA3-DFS6-01. 12
CA3-DFS6-011 inches, replace the backlight (1 / set)3 / setsCOM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionDigital small keyboard with USB interface.Converting 4 analog signals into digital signals10.4 inches (TFT), replace the backlight (2 / set)LT4000M (module type analog), PNP output, DC24V (host) CA3-DFS6-01. COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).Durable cable for connecting GP3000H adapter and GP3000H.For the elastic display module installation nut wrench (1 / set) CA3-DFS6-01. One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.Interface module for the simultaneous use of A/QnA/FX series external controllerInput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor output2 / setsExpansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communication10.4 inches (TFT), the replacement of the host backlight (1).Used to output the image signal from the host computer to GP5.7 inch screenn protective cover (1 pieces)Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) CA3-DFS6-01. Expansion module for the GPP3000 access to the CANopen network and communication with the CANopen master station10 CA3-DFS6-01. 4 inches (STN), the replacement of the host backlight (2 / set).