PFXZLMCNIO1 DIO LT4000M connector

Used to output the image signal from the host computer to GPUsed in a variety of host and man-machine interface for RS-232C connectionCOM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)A veneer, for the GP4000 series back loading models of full flush (white, 1)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) PFXZLMCNIO1 PFXZLMCNIO1 Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).Touch panel operation for RGB input modules (Master - from: Mini-B)5.7 inches, replace the backlight (1 / set)The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port PFXZLMCNIO1. Cable for connecting GP3000 to various modulesFor thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationFor 5.7 inch models, for fixing the hooks of the three EX modules PFXZLMCNIO1. Suitable for A/B+ Type modelsFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Touch screen anti ultraviolet protective film (1 pieces).3.5 inch screen protective cover (1 pieces)Data transmission cable between host and LT series. Length: 5 meters.The Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 channel x, VGA/SVGA/XGA) *110.4 inch screen protective cover (1 pieces)Conneector for connecting DC power cord (5 / set) PFXZLMCNIO1. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.A connector that connects the DIO interface for connecting an external I/O device (5 sets).Used to conveert the USB interface to the serial interface (RS-232C) PFXZLMCNIO1. A modem or bar code reader that can be connected to support RS-232C.Suitable for GLC2300 series