GP3000-MPI21-PFE MPI cable (3.5 m)

Connect to PC, transfer screen data and user programs.12 way 4 digital signals into analog signals and output resultsConnector for connecting a serial port (1)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface7 GP3000-MPI21-PFE. 4 inches, replace the backlight (1 / set)GP2500S use15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) GP3000-MPI21-PFE Note: joints A and B are different, the joints C and D different.For 5.7 inch models, for fixing the hooks of the three EX modules.The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display GP3000-MPI21-PFE. Touch screen anti ultraviolet protective film (1 pieces).12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) GP3000-MPI21-PFE. Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.The MITSUBISHI A series PLC is connected to GP, length: 5 m.For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).The main controller is connected to the man-machine interface of the host, for MPI communicationUSB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Direct interface Matsushita Electric PLC FP series CPU port.Converting 4 analog signals into digital signalsGP3000H replacement label (5 ssheets / set)The main controller is connected to the man-machine interface for MPI communicationPortable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters) GP3000-MPI21-PFE. For connecting the GP3000H cable connector andd the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block GP3000-MPI21-PFE.