Proface
Home >> Products >> Proface >> man-machine interface accessories >> PFXZCBCBMD1 MITSUBISHI 2-Port PLC adapter II (5 m)

PFXZCBCBMD1 MITSUBISHI 2-Port PLC adapter II (5 m)


Proface PFXZCBCBMD1 Product information and technical parameters:
Brand: Proface
Name: MITSUBISHI 2-Port PLC adapter II (5 m)
Model: PFXZCBCBMD1
Used to connect the 2-Port adapter to GP4000

SD memory card (4GB, MLC, CLASS4).For the DVI input to GP3000Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).12 way 2 digital signals into analog signals and output resultsSlave station module for connecting support for CANopenTransmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B) PFXZCBCBMD1 PFXZCBCBMD1 Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).For 5 PFXZCBCBMD1. 7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Extended cable for connecting USB (Type-A) (LT) interface.LT4000M (module type DIO), PNP output, DC24V (host).The nut for mounting the display module (10 / set).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) PFXZCBCBMD1. For 5.7 inch models, for fixing the hooks of the three EX modules.COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).Protection for GP rear connectors (large and small for each of the 1).Disposable film (5 sheets / sets) for protecting screen against contaminaation of human computer interfaceInput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputCOM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionThhe guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display PFXZCBCBMD1 PFXZCBCBMD1.


...More relevant models >>>>