CA7-DFS12-01 12.1 inch screen protective film

The main controller is connected to the man-machine interface for MPI communicationCOM1 interface with the cable for direct connection to the CPU series PLC ASuitable for LT4000M/GP4000M series modules, 5.7 inch. A veneer, for the GP4000 series back loading models of full flush (white, 1)LT4000M (module type DIO), NPN output, DC24V (host) CA7-DFS12-01. Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable CA7-DFS12-01 (5 / set)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.10.4 inches (TFT), replace the backlight (2 / set)12 way 4 digital signals into analog signals and output resultsSuitable for A/B+ Type modelsScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceLT4000M (module type analog), PNP output, DC24V (host) CA7-DFS12-01. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)GP3000H portable slingUsed for surface protection of man-machine interface from oil and chemical pollution (5 / set).Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM213 pin input connectors for HTB and 16 pin output connectors CA7-DFS12-01. (1 / set)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. A veneer, for the GP4000 series back loading models of full flush (white, 1)Touch screen anti ultraviolet protective film (1 pieces).For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 metters CA7-DFS12-01. Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)LT4000M (module type DIOO), PNP output, DC24V (host) CA7-DFS12-01. The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.