GP070-CN10-O RS-422 converter

5.7 inches, installed to provide the function of dust and moisture10.4 inches (TFT), the replacement of the host backlight (1).15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.10.4 inches (STN), the replacement of the host backlight (2 / set) GP070-CN10-O. Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) GP070-CN10-ODisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)7 GP070-CN10-O. 4 inches, installed to provide the function of dust and moistureWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.For 3.8 inch models, connect the connector to the DIO interface GP070-CN10-O. For connecting external I/O devices. (5 / set)The main controller is connected to the man-machine interface for MPI communicationSupport CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.GLC2300 is not availableFitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)Used in a variety of host and man-machine interface for RS-232C connection12 way 2 digital signals into analog signals and outputt resultsCOM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Suitable for LT4000M/GP4000M series modules, 3 GP070-CN10-O. 5 inch.10.4 inches (TFT), replace the backlight (2 / set)COM 2 interface with tthe cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorLT fasteners installed on the control panel (4 / set)