GPW-CB02 Picture data transmission cable

Converting 4 analog signals into digital signalsThe guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display. Interface module for the simultaneous use of A/QnA/FX series external controller3.4 Inch Touch Screen anti UV protective film (1 pieces) GPW-CB02. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) GPW-CB02Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceFor the DVI input to GP3000Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. Suitable for LT4000M/GP4000M series modules, 3.5 inch GPW-CB02. For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.3.5 inch screen protective cover (1 pieces)Touch screen anti ultraviolet protective film (1 pieces).12.1 inches, replaced by a host of backlight (1).COM2 terminal adapter for communication through the RS-422/485 connectionConverting 2 analog signals into digital signals5 GPW-CB02. 7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).GLC2300 is not available12.1 inch screen protective cover (1 pieces)For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)7.0/7.5 inch screen protective cover (1 pieces)Touch panel operation for RGB input modules (Master - from: Mini-B)COM2 adapter for converting the COM2 interface to the RS-422 terminal blockApply to GLC-2600/2500Data transmission cable betweeen host and LT series GPW-CB02. Length: 5 meters.1-0 DVI standard (DVI-D 24 pin convex connector)A veneer, for the GP4000 series back loading models of full flush (white, 1)One end is a loose wire, which is used to carry out RS-232C connection betweeen the host and LT GPW-CB02. 12 way 4 digital signals into analog signals and output resultsExtension cable for connecting USB (Type-A) interface to front panel.