CGP070-ID11-M DIO NPN single head cable

For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)I/O expansion module, including the 8 point relay /1 public endOne end is a loose wire, which is used to carry out RS-232C connection between the host and LT CGP070-ID11-M CGP070-ID11-M 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface CGP070-ID11-M. The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.10.4 inch screen protective cover (1 pieces)Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceInput / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputData transmission cable between host and LT series CGP070-ID11-M. Length: 5 meters.Standard cable for connecting GP3000H adapter and GP3000H.
Length: 5 meters. Suitable for A/B+ Type modelsVideo-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)For RGB input USB cable to prevent disconnection (2 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Used to install the human machine interface to the fixed panel (2 / cover).5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models CGP070-ID11-M. (2 / set)A1/A2/B+ DIO Type connector (compression type) (5 / set)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters) CGP070-ID11-M.