GLC100-DIOCN01 DIO connector

Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).Portable GP2000H series models accessories, RS-422 single head cable (3 m).LT4000M (module type analog), PNP output, DC24V (host).For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices GLC100-DIOCN01. (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceFor the DVI input to GP3000Fitting on NETWORK FLEX interface GLC100-DIOCN01 Connecting NETWORK FLEX communication cable. (5 / set)AUX connector for external output (5 / set).Used to install the GP3000H series to a commercially available support arm or panel.For connecting GP operation data with D-Sub RS-232C and power /DIO terminals GLC100-DIOCN01. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters. GP4000 series back mounted model of waterproof rubber gasket. (1)Connector for connecting a serial port (1)LT seal on the control panel.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) GLC100-DIOCN01. Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display. Used to prevent accidental operation. Includes 3 mounting screws.Slave station module for connecting support for CANopenTouch screen anti ultraviolet protective film (1 pieces).For conneccting GP operation data with RS-422 and power /DIO terminals GLC100-DIOCN01. 3.5 inch screen protective cover (1 pieces)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.CCable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) GLC100-DIOCN01.