Used to convert RGB to DVI-AFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.12.1 inch screen protective cover (1 pieces)USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) FN-Y08RL41. Used to convert the USB interface to the serial interface (RS-232C)
FN-Y08RL41 A modem or bar code reader that can be connected to support RS-232C.COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine FN-Y08RL41. Used to install the human machine interface to the fixed panel (2 / cover).Cable for connecting GP3000 to various modulesB/B+/C FLEX NETWORK Type connector (5)Touch screen anti ultraviolet protective film (1 pieces).Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).Connector for connecting a serial port (1)COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connector15 inches, replaced by a host of backlight (1) FN-Y08RL41. For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)A veneer, for the GP4000 series back loading models of full flush (white, 1)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).10.4 inches (STN), the replacement of the host backlight (2 / set).Used in a variety of host and man-machine interface for RS-422 connectionLLT4000M (module type DIO), NPN output, DC24V (host) FN-Y08RL41. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).1-0 DVI standard (DVI-D 24 pin convex connector)Backup battery for time and data backup (1).Disposable film (5 sheetss / sets) for protecting screen against contamination of human computer interface FN-Y08RL41. Protection for GP rear connectors (large and small for each of the 1).