CA6-DIOCNALL-01 DIO connector

When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorFor 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening CA6-DIOCNALL-01. Connector for connecting DC power cord (5 / set) CA6-DIOCNALL-01Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationData transmission cable between host and LT series. Length: 5 meters.The Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 channel x, VGA/SVGA/XGA) *1Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) CA6-DIOCNALL-01. 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display CA6-DIOCNALL-01. 7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).Used to display analog RGB (2 channels) on the GP3000Protection for GP rear connectors (large and small for each of the 1).10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)Connector for connecting a serial port (1)Useed for surface protection of man-machine interface from oil and chemical pollution (5 / set) CA6-DIOCNALL-01. 10.4 inches (TFT), the replacement of the host backlight (1).LT4000M (module type DIO), PNP output, DC24V (host).USB cable clamp for preventing disconnectionn of connection (5 / set)Used in a variety of host and man-machine interface for RS-232C connectionLT fasteners installed on the control panel (4 / set)