FN-AD04AH11 4 channel A/D conversion module

5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)LT4000M (module type DIO), NPN output, DC24V (host).Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port FN-AD04AH11. I/O module, including 32 point NPN/PNP inputFor the operation screen (5 pieces) (GP3000H standard) FN-AD04AH11Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Converting 2 analog signals into digital signalsThe main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication FN-AD04AH11. For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Used to install the man-machine interface to the fixed panel. (4 / set)The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.10.4 inches or larger, when installed to provide the function of dust and moistureConnector for connecting DC power cord FN-AD04AH11. (linear, 5 / set)COM2 adapter for converting the COM2 interface to the RS-422 terminal blockReplaceable anti fouling film for protecting screen protective film (5 sheets / cover).The nut for mounting the display module (10 / set).Portable GP2000H series models accessories, RS-422 single head cable (3 m).Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationConnector for connecting DC power cord (5)Used to convert RGB to DVI-A7.4 inches, repplace the backlight (1 / set)For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)LT4000M (module type analog), NPN output, DC24V (host) FN-AD04AH11. For 3.8 inch models, preventt cable loose from the USB cable fastening clip (5 / set) FN-AD04AH11. One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.