CA1-WMALRG-01 Wall mounted fixed frame

For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationFor RGB input USB cable to prevent disconnection (2 / set)COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connector7 CA1-WMALRG-01 CA1-WMALRG-01 4 inches, installed to provide the function of dust and moistureStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter CA1-WMALRG-01.
Length of 10 meters. I/O expansion module, including the 8 point relay /1 public endColorful LED switch with USB interface.Some types of PLC are not connected. Length: 5 meters.Portable GP2000H series models accessories, RS-232 single head cable (10 m).5.7 inches, replace the backlight (1 / set)B/B+/C FLEX NETWORK Type connector (5)The module is used for mounting on the back board of the GLC2000 series host computer CA1-WMALRG-01. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.Touch screen anti ultraviolet protective film (1 pieces).Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface).For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)A veneer, for the GP4000 series back loading models of full flush (white, 1)For connecting GP operation data with D-Suub RS-232C and power /DIO terminals CA1-WMALRG-01. The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.5.7 inches, installed to provide the function of dust and moistureDisposable film (5 sheets / sets)) for protecting screen against contamination of human computer interface CA1-WMALRG-01. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters.