GP2000-CBLQ/5M-01 MITSUBISHI Q series PLCCPU interface cable

For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)A1/A2/B+ DIO Type connector (welding type) (5 / set)10.4 inches (TFT), replace the backlight (2 / set)Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceStandard cable for connecting GP3000H adapter and GP3000H GP2000-CBLQ/5M-01 GP2000-CBLQ/5M-01
Length: 5 meters. A veneer, for the GP4000 series back loading models of full flush (white, 1)7.0/7.5 inch screen protective cover (1 pieces)10.4 inches or larger, when installed to provide the function of dust and moistureThe nut for mounting the display module (10 / set).GP4000 series back mounted model of waterproof rubber gasket GP2000-CBLQ/5M-01. (1)Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputTouch screen anti ultraviolet protective film (1 pieces).Connector for connecting DC power cord (5)Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).GP3000H portable slingFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters GP2000-CBLQ/5M-01. 7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. Backup battery for time and data backup (1).The host controller is connected to the host computer interface, which is used for multtiple connection (n:1) communication GP2000-CBLQ/5M-01. 10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interrface, 5 / set)The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication GP2000-CBLQ/5M-01.