GP2000-CBLFX/1M-01 MITSUBISHI FX series PLCCPU interface cable

7.5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).COM2 adapter for converting the COM2 interface to the RS-422 terminal block10.4 inches (TFT), the replacement of the host backlight (1).With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models GP2000-CBLFX/1M-01 GP2000-CBLFX/1M-01 (2 / set)The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.12.1 inches, replace the backlight (1 / set)3 / setsWhen the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) GP2000-CBLFX/1M-01. Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. COM2 terminal adapter for communication through the RS-422/485 connectionUsed to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. NETWORK FLEX 64 point DIO connector terminal block, (including 2)Durable cable for connecting GP3000H adapter and GP3000H GP2000-CBLFX/1M-01. SD memory card (4GB, MLC, CLASS4).Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).Disposable battery (1 blocks) for backing up clock data.7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00). GP2000-CBLFX/1M-01. Portable GP2000H series models accessories, RS-422 single head cable (3 m).Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.Portable GP2000H series models accessories, RS-422 cable with D-Subb connector (3 meters) GP2000-CBLFX/1M-01. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.