GPM-AXCN01 Screw fixing terminal block

Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. 3.4 Inch Touch Screen anti UV protective film (1 pieces).COM2 adapter for converting the COM2 interface to the RS-422 terminal blockPortable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters) GPM-AXCN01. 10.4 inches (TFT), replace the backlight (2 / set)B/B+/C FLEX NETWORK Type connector (5)12 GPM-AXCN011 inch screen protective cover (1 pieces)Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceClock battery, save system date and time when power is off GPM-AXCN01. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.Connector for connecting DC power cord (5)Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface GPM-AXCN01. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Portable GP2000H series models accessories, RS-422 single head cable (3 m).For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Touch screen anti ultraviolet protective film (1 pieces).5 / setsWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture prooff function GPM-AXCN01. (1)Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).The main controller is connected to the man-machine interface for MPI communication12.1 inches, replaced by a host of backlight (1).CCable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) GPM-AXCN01.