GP3000H-CBLSD-10M GP3000H soft belt joint type straight cable

10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.B/B+/C FLEX NETWORK Type connector (5)LT fasteners installed on the control panel (4 / set)For connecting GP operation data with D-Sub RS-232C and power /DIO terminals GP3000H-CBLSD-10M. 5.7 inch screen protective cover (1 pieces)For 5 GP3000H-CBLSD-10M7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Cable for connecting GP3000 to various modulesGLC2300 is not availableTouch screen anti ultraviolet protective film (1 pieces).Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Disposable battery (1 blocks) for backing up clock data GP3000H-CBLSD-10M. Adapter for EX module (5 / set)12 way 2 digital signals into analog signals and output resultsCable for connecting GP3000 to various modulesWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)4.3 Inch Touch Screen anti UV protective film (1 pieces) GP3000H-CBLSD-10M. A veneer, for the GP4000 series back loading models of full flush (white, 1)AUX connector for external output (5 / set).Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)10.4 inches or larger, when installed to provide the function of dust and moistureFor 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Used for convertting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointA connector that connects the DIO interface for connecting an external I/O device (5 sets) GP3000H-CBLSD-10M. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Inpuut / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputThe PC adapter for PCMCIA slot read CF card required GP3000H-CBLSD-10M.