CA7-DIOCN5-01 DIO connector

COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.15 inches, replaced by a host of backlight (1).5.7 inches, replace the backlight (1 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceConnect to PC, transfer screen data and user programs CA7-DIOCN5-01 CA7-DIOCN5-01 For the DVI input to GP3000Touch screen anti ultraviolet protective film (1 pieces).USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer.Portable GP2000H series models accessories, RS-422 single head cable (10 m) CA7-DIOCN5-01. Extended cable for connecting USB (Type-A) (LT) interface.For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionCOM2 adapter for converting the COM2 interface to the RS-422 terminal blockGP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelPortable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters) CA7-DIOCN5-01. Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).5.7 inch screen protective cover (1 pieces)3 / setsAdapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.The main controller is connected to the man--machine interface of the host, for MPI communicationDurable cable for connecting GP3000H adapter and GP3000H CA7-DIOCN5-01. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceConnect to USB printer (Tyype-B) CA7-DIOCN5-01. 2 / setsPortable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).Converting 2 analog signals into digital signals