CA3-CBLCBT422-01 9-25 RS-422 pin conversion cable (20 cm)

Portable GP2000H series models accessories, RS-422 single head cable (10 m).Touch screen anti ultraviolet protective film (1 pieces).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Used to display analog RGB (2 channels) on the GP3000Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA3-CBLCBT422-01. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA3-CBLCBT422-01 (1)12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) CA3-CBLCBT422-01. COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)Durable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.COM1 interface with the cable for direct connection to the CPU series PLC A5 CA3-CBLCBT422-01. 7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).GLC2300 is not availableUsed for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointStop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convexx) CA3-CBLCBT422-01. Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)5.7 inches, replace the backlight (1 / set)Direct interface Matsushita Electric PLC FP series CPU port. CA3-CBLCBT422-01. 10.4 inches or larger, when installed to provide the function of dust and moistureData transmission cable between host and LT series. Length: 5 meters.