3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.
10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Connector for connecting DC power cord. (right angle, 5 / set)OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.10.4 inches (TFT), the replacement of the host backlight (1) ST400-WP01. Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface)
ST400-WP01For the man-machine interface hanging in the neck lanyard.Adapter for EX module (5 / set)Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)Used to prevent disconnection. (1 interface, 5 / set)Length: 5 meters ST400-WP01. To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)2 / setsFor the elastic display module installation nut wrench (1 / set).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Cable for connecting GP3000 to various modulesUsed to display analog RGB (2 channels) on the GP3000Touch screen anti ultraviolet protective film (1 pieces) ST400-WP01. Touch screen anti ultraviolet protective film (1 pieces).For the operation screen (5 pieces) (GP3000H standard).COM1 interface with the cable for direct connection to the CPU series PLC QDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. 2GB, for the implementation of the picture save, log and data backup and other data management operations, suuch as compression flash memory card ST400-WP01. 10.4 inches (TFT), replace the backlight (2 / set)5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)GP-230/2500/270 series is replaced by ST series, the gap filled with the opening of the panelApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) ST400-WP01.