PFXGP4301TAD OPERATION MANUAL ()

Connector for connecting DC power cord. (linear, 5 / set)Touch screen anti ultraviolet protective film (1 pieces).10.4 inches (STN), the replacement of the host backlight (2 / set).The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication PFXGP4301TAD OPERATION MANUAL. Used to connect the 2-Port adapter to GP4000When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function PFXGP4301TAD (1)Display type: TFT color LCD.
Screen size: 10.1 inch widescreen.
Resolution: 800 x 480 pixels (WVGA).
Effective display area: H131.76mm * W219.6mm.
Display color: 65536 color.
Backlight: LED.
Brightness adjustment: 8 level adjustment can be carried out by touch panel PFXGP4301TAD OPERATION MANUAL.
Backlight lamp life: 20000 hours or more (in a 25 C environment, continuous work - brightness decreased to 50% of the original).
Language: Chinese (simplified).
Character size: 8 x 8 pixels, 8 x 16 pixels, 16 x 16 pixels and 32 x 32 pixels.
Font size: 2, 4,, 8, 1,, 2,,, 1, 8, and 4 times.
Interface: x1 RS-232C, x1 RS-422/485, Type-A x1 USB, Mini-B x1 USB (for the project file upload / download) PFXGP4301TAD OPERATION MANUAL.
Input voltage: DC24V.
Using 65536 color 3D simulation components, you can create a beautiful appearance of the operation of the screen.
Due to the use of a widescreen display, so in a picture can also place a keyboard.
Variety of switches and lights and other basic functions can be used in 65536 colors.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)GP4000E series entry-level programmable man-machine interface.
Screen size: 7 inch widescreen.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V.
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery.
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Helps to reduce the cost of the modules to be added after connecting these controllers with PLC.
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intrusion.
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controoller, robot, vision sensor, etc PFXGP4301TAD Manual. .
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business. PFXGP4301TAD Manual.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC.