PFXGP4601TAA OPERATION MANUAL ()

Used to install the man-machine interface to the fixed panel. (4 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.SP-5600WA+SP-5B40 combination.
Screen size: 12 inch widescreen (WXGA).
Multi touch: support.
Windows applications - -.
Application storage space: 64MB (CFast card) PFXGP4601TAA OPERATION MANUAL.
Video / audio: support.
CFast card: 2.
SD card: 1 PFXGP4601TAA
USB interface Type-A:3.
USB interface Mini-B:1.
Serial port: 2.
Ethernet port: 2.
Rated voltage: DC24V.
SP-5600WA+SP-5B10 combination.
Screen size: 12 inch widescreen (WXGA).
Multi touch: -.
Windows applications - -.
Application storage space: 64MB (SD card).
Video / audio: -.
CFast card: -.
SD card: 2.
USB interface Type-A:2 PFXGP4601TAA OPERATION MANUAL.
USB interface Mini-B:1.
Serial port: 2.
Ethernet port: 2.
Rated voltage: DC24V.
The intelligent man machine interface of the two Ethernet interface can be assigned a different IP address.
In this way, we can establish a network of high security between the office and the factory.
In addition, the collected data can be saved to NVRAM to avoid data loss.
Display module and host module free combination, function and size of flexible
6 Display Module 2 host module, can realize the 12 kinds of "intelligent man-machine interface" PFXGP4601TAA OPERATION MANUAL.
Modular design, display module and the host module can be split, so that can be replaced.GP4000E series entry-level programmable man-machine interface.
Screen size: 10 inch widescreen.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controller, robot, vision sensor, etc..
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC.
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery.
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Heelps to reduce the cost of the modules to be added after connecting these controllers with PLC PFXGP4601TAA Manual.
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intruusion PFXGP4601TAA Manual.
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.