PFXZCFAF31 4.3 inch models to install a fixed screw

A veneer, for the GP4000 series back loading models of full flush (white, 1)7.0/7.5 inch screen protective cover (1 pieces)Used to install the man-machine interface to the fixed panel. (4 / set)COM1 interface with the cable for direct connection to the CPU series PLC Q10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)10 PFXZCFAF31 PFXZCFAF31 4 inches (STN), the replacement of the host backlight (2 / set).5.7 inches, replace the backlight (1 / set)Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceThe MITSUBISHI A series PLC is connected to GP, length: 5 m PFXZCFAF31. Suitable for A/B+ Type modelsSlave station module for connecting support for CANopenUSB cable to prevent disconnection of the fastening clip (5 / set)Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors PFXZCFAF31.
Length: 10 meters. Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).The MITSUBISHI Q series PLC is connected to GP, length: 5 m.Adapter for EX module (5 / set)5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Connect to the SIEMENS PLC or MPI, used to connect the ccommercial type PROFIBUS connector COM2Clock battery, save system date and time when power is off PFXZCFAF31. B/B+/C FLEX NETWORK Type connector (5)Touch screen anti ultraviolet protective film (1 pieces).Touch panel operation for RGB input modules ((Master - from: Mini-B)Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block PFXZCFAF31.