PFXZCDSCCFA321 Memory CFast card (32GB)

For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Cable for connecting GP3000 to various modulesConnector for connecting DC power cord. (right angle, 5 / set)COM2 adapter for converting the COM2 interface to the RS-422 terminal blockUsed to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors PFXZCDSCCFA321 PFXZCDSCCFA321
Length: 3 meters. The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) PFXZCDSCCFA321. Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Some types of PLC are not connected PFXZCDSCCFA321. Length: 5 meters.USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters. Used to install the man-machine interface to the fixed panel. (4 / set)For the elastic display module installation nut wrench (1 / set).The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.COM1 interface with the cable for direct connection to the CPU seriess PLC A1-0 DVI standard (DVI-D 24 pin convex connector)Length: 5 meters PFXZCDSCCFA321. Converting 2 analog signals into digital signals7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L type12. PFXZCDSCCFA321. 1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).