For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set) GP3000-DVI01. 7.4 inches, replace the backlight (1 / set)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters)
GP3000-DVI01When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)10.4 inch screen protective cover (1 pieces)Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputA1/A2/B+ DIO Type connector (welding type) (5 / set)GP2500S useFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters GP3000-DVI01. Used to install the GP3000H series to a commercially available support arm or panel.The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication GP3000-DVI01. The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Converting 2 analog signals into digital signalsStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial dissplay device (24- DVI-D pin convex) GP3000-DVI01. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).7.5 inches, GPP installed to the hard panel to provide dust and moisture proof function GP3000-DVI01. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters.