CA6-BLU10T-02 Replace with backlight

LT4000M (module type DIO), NPN output, DC24V (host).Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)A1/A2/B+ DIO Type connector (compression type) (5 / set)Cable for connecting GP3000 to various modulesTouch screen anti ultraviolet protective film (1 pieces) CA6-BLU10T-02. 128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA6-BLU10T-02Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceConnector for connecting a serial port (1)10.4 inches (TFT), the replacement of the host backlight (1).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA6-BLU10T-02. (1)Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationAUX connector for external output (5 / set).Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputGP3000H portable slingUSB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer CA6-BLU10T-02. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.10.4 inches (STN), the replacement of the host backlight (2 / set).NETWORK FLEX 64 point DIO connector terminal block, (including 2)For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.3 / setsFor 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).7.5 inches /3.8 inchess /5 CA6-BLU10T-02. 7 inches, used to connect the power cord (5 / sets).4.3 Inch Touch Screen anti UV protective film (1 pieces).Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail CA6-BLU10T-02.