CA3-CFCALL/256MB-01 CF card

When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Touch screen anti ultraviolet protective film (1 pieces).Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) CA3-CFCALL/256MB-01 CA3-CFCALL/256MB-01 A veneer, for the GP4000 series back loading models of full flush (white, 1)(serial communication terminal adapter is included in the product package)5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).Protection for GP rear connectors (large and small for each of the 1) CA3-CFCALL/256MB-01. For connecting GP operation data with RS-422 and power /DIO terminals.Touch screen anti ultraviolet protective film (1 pieces).10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) CA3-CFCALL/256MB-01. Converting 4 analog signals into digital signalsFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.A veneer, for the GP4000 series back loading models of full flush (white, 1)The Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 cchannel x, VGA/SVGA/XGA) *1GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelTouch screen anti ultraviolet protective film (1 pieces) CA3-CFCALL/256MB-01. Portable GP2000H series models accessories, RS-422 siingle head cable (10 m) CA3-CFCALL/256MB-01. For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.