CA3-ADPTRM-01 RS-422 conversion adapter

Durable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.Portable GP2000H series models accessories, RS-422 single head cable (10 m).Adapter for EX module (5 / set)One end is a loose wire, which is used to carry out RS-485 connection between the host and LT CA3-ADPTRM-01. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor output7 CA3-ADPTRM-014 inches, installed to provide the function of dust and moistureConverting SIO to RS-422 terminal blockApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)The main controller is connected to the man-machine interface for MPI communicationStop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) CA3-ADPTRM-01. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA3-ADPTRM-01. COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorPortable GP2000H series models accessories, RS-232 single head cable (10 m).For 5.7 inch models, for fixing the hooks of the three EX modules.Standard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).LT4000M (module type DIO), NPN output, DC24V (host) CA3-ADPTRM-01. Touch panel operation for RGB input modules (Master - from: Mini-B)With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) CA3-ADPTRM-01. The PC adapter for PCMCIA slot read CF card required.Used in a variety of host and man-machine interface for RS-232C connection