PFXLM4201TADAK Hardware Setup Manual ()

5.7 inches, installed to provide the function of dust and moistureInput voltage: DC24V.
Screen size: 7 inch widescreen.
Display type (resolution):65536 color TFT (WVGA 800 x 480 pixels).
Touch panel type: analog resistance.
Memory: 16MB (internal memory), SRAM128KB (backup memory).
Ethernet interface: 1 PFXLM4201TADAK Hardware Setup Manual.
Serial port: RS-232C * 1, RS-422/485 * 1.
SD card slot (max 32GB):1 PFXLM4201TADAK
USB interface: Type-A x (2) USB 1, Mini-B USB (2) x 1.
Replaceable battery: yes.
Alarm analysis function block: No.
Panel opening size:
Wide 204.5 x high 159.5mm (+1/0mm).
Panel thickness: 1.6-5mm, chamfer radius is less than R3.
Coating models: none.
Easily connect a variety of USB devices
Can be easily connected to the man-machine interface serial controller, EZ series accessories, bar code reader and USB memory PFXLM4201TADAK Hardware Setup Manual.
Remote data acquisition and management
Human machine interface, which is installed on the production machine,
With EX Microsoft software combined with Office Pro-Server and SQL and other standard PC software,
Can be simple and economical to establish a set of data management system, and effectively improve the quality of production and efficiency PFXLM4201TADAK Hardware Setup Manual. 5.7 inch screen protective cover (1 pieces)Touch screen anti ultraviolet protective film (1 pieces).Clock battery, save system date and time when power is off.Analog /NPN output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
USB (host):1.
USB (equipment):1.
Built in DIO input: 12 points.
Built in DIO output: 6 points.
Built in AIO input: 4 points.
Built in AIO output: 2 points.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input.
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The ccontrol function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface PFXLM4201TADAK Manual.
Integrated design.
Adopt integrative design, compact structure,
When the installlation is only required to open a hole in the panel 22mm PFXLM4201TADAK Manual.
The display module or the control module can be easily replaced when the fault is eliminated.