PFXGP4501TADC SYSTEM CONFIGURATION MANUAL ()

Used to install the man-machine interface to the fixed panel. (4 / set)The nut for mounting the display module (10 / set).One end is a loose wire, which is used to carry out RS-485 connection between the host and LT."Type: there is an emergency stop switch (yellow) and a key switch.
Display type: TFT color LCD PFXGP4501TADC SYSTEM CONFIGURATION MANUAL.
Display size: 5.7 inch.
Display color: 65536 color (no flicker), 16384 color (flashing) PFXGP4501TADC
Resolution (pixel) x:640 480 (VGA).
Memory: 32MB.
Data backup: 320KB SRAM.
Emergency stop switch provides 3 colors of red, yellow and grey.
3 position enable switch with forced contact disconnect function.
Key switch without pressing the emergency stop switch can also be mobile devices.
Very light PFXGP4501TADC SYSTEM CONFIGURATION MANUAL.
The high visibility of the configuration of the 65536 color TFT color LCD.
High definition and wide viewing angle to bring excellent visual effects.
Easily replace GP3000H series. "GP4000E series entry-level programmable man-machine interface.
Screen size: 7 inch widescreen.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB PFXGP4501TADC SYSTEM CONFIGURATION MANUAL.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V.
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery.
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Helps to reduce the cost of the modules to be added after connecting these controllers with PLC.
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intrusion.
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controlller, robot, vision sensor, etc PFXGP4501TADC Manual. .
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business. PFXGP4501TADC Manual.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC.