CA1-STDLRG-01 User's Manual ()

10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C CA1-STDLRG-01 User's Manual. Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2COM2 adapter for converting the COM2 interface to the RS-422 terminal blockMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA1-STDLRG-01Adapter for EX module (5 / set)Suitable for GLC2300 seriesUsed in a variety of host and man-machine interface for RS-232C connectionThe main controller is connected to the man-machine interface for MPI communicationCOM1 interface with the cable for direct connection to the CPU series PLC Q10 CA1-STDLRG-01 User's Manual. 4 inches (TFT), the replacement of the host backlight (1).12.1 inches, replaced by a host of backlight (1).The main controller is connected to the man-machine interface for MPI communication5 CA1-STDLRG-01 User's Manual. 7 inches, GP installed to the hard panel to provide dust and moisture proof function.For the operation screen (5 pieces) (GP3000H standard).Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master station13 pin input connectors for HTB and 16 pin output connectors. (1 / set)5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communicatioon cable CA1-STDLRG-01 Manual. (5 / set)Protection for GP rear connectors (large and small for each of the 1).The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.12. CA1-STDLRG-01 Manual. 1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).