CA9-USBATRGB/MB-01 RGB input module dedicated USB cable fastener (RGB input module side -MiniB)

USB cable clamp for preventing disconnection of connection (5 / set)LT4000M (module type DIO), NPN output, DC24V (host).Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface10.4 inches (TFT), replace the backlight (2 / set)Converting SIO to RS-422 terminal block1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA9-USBATRGB/MB-01 CA9-USBATRGB/MB-01 When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)10.4 inches or larger, when installed to provide the function of dust and moistureFor connecting GP operation data with RS-422 and power /DIO terminals CA9-USBATRGB/MB-01. Adapter for EX module (5 / set)Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) CA9-USBATRGB/MB-01. Extended cable for connecting USB (Type-A) (LT) interface.I/O expansion module, including the 8 point relay /1 public endUsed to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. 7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.LT4000M (module type analog), NPN output, DC24V (host).A connector that connects the DIO interface for connecting an external I/O device (5 sets).Standard cable for connecting GP3000H adapter and GP3000H CA9-USBATRGB/MB-01.
Length: 3 meters. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputThe main controller is directly connected to the man-machine interface (D-sub 9 pin conccave) for multiple connection (n:1) communication CA9-USBATRGB/MB-01. To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)