CA7-HTBCNSET-01 User's Manual ()

Used in a variety of host and man-machine interface for RS-232C connectionCOM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionExtended cable for connecting USB (Type-A) (LT) interface.10.4 inches (TFT), the replacement of the host backlight (1).Slave station module for connecting support for CANopenCOM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceFitting on NETWORK FLEX interface CA7-HTBCNSET-01 User's Manual CA7-HTBCNSET-01 Connecting NETWORK FLEX communication cable. (5 / set)10.4 inches and above, used to connect the power cord (5 / set).COM1 interface with the cable for direct connection to the CPU series PLC A512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA7-HTBCNSET-01 User's Manual. For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Used to convert RGB to DVI-A256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA7-HTBCNSET-01 User's Manual. For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)For RGB input USB cable to prevent disconnection (2 / set)Touch panel operation for RGB input modules (Master - from: Mini-B)Engineering documents created by the LT interface to download images and logic programming software through the USB interface.For 5.7 inch models, connect the connector too the DIO interface CA7-HTBCNSET-01 Manual. For connecting external I/O devices. (5 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.For 5.7 inch models, prevent cable loose from the USB cable fastening cclip (5 / set) CA7-HTBCNSET-01 Manual. Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.