CA7-HTBCNSET-01 User's Manual ()

Used in a variety of host and man-machine interface for RS-422 connectionExtended cable for connecting USB (Type-A) (LT) interface.12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).10.4 inches (TFT), the replacement of the host backlight (1) CA7-HTBCNSET-01 User's Manual. Used to convert the USB interface to the serial interface (RS-232C) CA7-HTBCNSET-01 A modem or bar code reader that can be connected to support RS-232C.The main controller is connected to the man-machine interface for MPI communicationCOM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) CA7-HTBCNSET-01 User's Manual. Protection for GP rear connectors (large and small for each of the 1).10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module CA7-HTBCNSET-01 User's Manual. 10.4 inches (TFT), the replacement of the host backlight (1).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceAdapter for EX module (5 / set)1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Engineering documents created by the LT interface to download images and logic programming software through the USB interface.For 3.8 inch models, connect thhe connector to the DIO interface CA7-HTBCNSET-01 Manual. For connecting external I/O devices. (5 / set)10.4 inches and above, used to connect the power cord (5 / set).Used to connect the SIEMENS S5 PLC series to the host computer interfaceFor 3.8 iinch models, prevent cable loose from the USB cable fastening clip (5 / set) CA7-HTBCNSET-01 Manual. COM1 interface with the cable for direct connection to the CPU series PLC Q