CA6-USB232-01 User's Manual ()

COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connector10.4 inches (TFT), the replacement of the host backlight (1).10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories CA6-USB232-01 User's Manual. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA6-USB232-01COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceConnect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM27 CA6-USB232-01 User's Manual. 5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.7.5 inches, GP installed to the hard panel to provide dust and moisture proof function CA6-USB232-01 User's Manual. For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Adapter for EX module (5 / set)10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).15 inches, GP installed to the hard panel to provide dust and moisture proof function.Adapter for EX module (5 / set)Touch panel operation for RGB input modules (Master - from: Mini-B)COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)COM1 interface with the cable for direct connection to the CPU series PLC QAdapter for EX module (5 / set)13 pin input connectors for HTB and 16 pin output connectors CA6-USB232-01 Manual. (1 / set)5 CA6-USB232-01 Manual. 7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).