CA3-ISO232-01 User's Manual ()

12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).USB cable clamp for preventing disconnection of connection (5 / set)COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface CA3-ISO232-01 User's Manual CA3-ISO232-01 COM1 interface with the cable for direct connection to the CPU series PLC QConnect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA3-ISO232-01 User's Manual. 10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Extended cable for connecting USB (Type-A) (LT) interface CA3-ISO232-01 User's Manual. For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).The main controller is connected to the man-machine interface for MPI communication5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationCOM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)5.7 inches thin film used for surface protection of man-machinne interface from fingerprints, water droplets, dust and oil pollution (5 / set) CA3-ISO232-01 Manual. Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.Extension cable for connecting USB (Type-A) interface to front panel CA3-ISO232-01 Manual. GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panel